Work with us at O.W. Lee
OW Lee in Comfort, TX
Thank you for your interest in working with us. Click on the jobs below to read more and apply. If you do not see a position that fits, please leave your information and we will contact you should an opportunity arise.
For more about our company, visit www.owlee.com/about
Job Listings
Welder
SUMMARY:
The Welder has primary responsibility is TIG and/or MIG welding of aluminum and steel parts. Each job must be run with safety, accuracy, and timeliness in the welding area.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:
- Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job.
- Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment.
- Prepares, assembles, and tacks weld parts and surfaces to be welded.
- Maintains, organizes, and cleans equipment and the work area.
- Must be able to properly and safely lift up to 50 lbs. pounds.
- Employee will not lift by self any items over 50lbs, you will ask for assistance.
- You will familiarize yourself with proper lifting and turning procedures using legs –not your back.
- Must be able to properly and safely operate machinery, as trained and authorized to do so by the company.
- Do not use machinery that you are not familiar with and have not been instructed in proper use techniques.
- Welding helmet, gloves, apron, and safety glasses MUST be worn at all times.
- Hearing protection MUST be used in any high noise areas, welding, grinding, hammering, air press, and cutting areas.
- DO NOT look at the welding area with naked eyes, as even a glace can cause damage. Always wear properly approved safety glasses to view the welding arc.
- You must wear an N95 dust/mist respirator mask when welding, cutting or grinding.
- You must wear rubber sole – leather type work shoes (no sneakers). Full-length pants and long sleeves shirts with forearms protectors (or) suitable welding jacket (or) welding apron and sleeves (no sleeveless shirts permitted).
- Performs other related duties as assigned.
Qualifications
GENERAL EXPECTATIONS:
Must be physically able to lift 50lbs. Must be able to perform the job in a standing position for a length of shift. Must have welding experience using Tig/Mig Welder and adjusting amps on the welding machine. Must be able to use 1-2 lbs. hammer.
This is semi-strenuous work requiring good correct vision, lifting, stooping, kneeling, bending, reaching, pulling, tuning, and walking from one workstation to another.
All safety procedures must be followed, and equipment worn properly.
SUPERVISORY RESPONSIBILITIES: None.
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily in accordance with established standards and quality. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience
EDUCACIÓN y/o EXPERIENCIA:
Soldadura: 1 año (preferido)
HABILIDADES MATEMÁTICAS: Sumas y restas básicas.
DEMANDAS FÍSICAS Las demandas físicas aquí descritas son representativas de las que debe cumplir un empleado para realizar con éxito las funciones esenciales de este trabajo.
Se pueden hacer adaptaciones razonables para permitir que las personas con discapacidades realicen las funciones esenciales. Uso regular de las manos para tocar, manipular o palpar y alcanzar con las manos y los brazos (a la altura de la cintura). Debe ser capaz de levantar, mover, transportar, empujar y tirar hasta 50 libras.
AMBIENTE DE TRABAJO Las características del ambiente de trabajo descritas aquí son representativas de las que un empleado encuentra mientras realiza las funciones esenciales de este trabajo. Se pueden hacer adaptaciones razonables para permitir que las personas con discapacidades realicen las funciones esenciales.
Exposición ocasional a piezas mecánicas móviles. Exposición ocasional a climas fríos o calurosos. El nivel de ruido en el entorno de trabajo suele ser moderado.
Benefits/Company
Benefits:
- 401(k)
- 401(k) matching
- Dental insurance
- Employee discount
- Flexible spending account
- Health insurance
- Life insurance
- Paid time off
- Vision insurance
Compensation
Starting at $16/Hour
General Production
Job description
SUMMARY: The General Production Worker completes various tasks in their designated department. Departments include Finishing, Parts, Grinding, Strapping, Upholstery, Assembly, Table Tops, Packing, and Shipping.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Complete various tasks and duties as assigned correctly and on time.
- Use only established procedures for assigned tasks.
- Inspect your work for quality and to make sure it meets specifications.
- Keep work area clean and picked up.
- Always strive to increase productivity.
- Pay close attention to any machinery you may be operating & make sure it is operating properly. Notify your supervisor as soon as you notice the machine not operating properly.
- If you are unsure what to do or use at any time, ask your supervisor.
- Other duties as assigned
SAFETY:
- Understand thoroughly the Company’s work and workplace safety policies and procedures.
- Follow all company safety policies, other policies & procedures.
- Watch for employees who are not wearing proper safety equipment or are committing safety violations, and report any incidents to your Lead, Supervisor, or Manager as soon as possible.
- Notify the department Lead Supervisor or Manager immediately of any serious situation to correct the situation.
Qualifications
– Able to perform manual labor: Physically able to lift up to 50 lbs, bend, stoop, kneel and climb
– Ability to stand for 8 hours a day
– Able to have good attendance
– Able to follow instructions and work in a team environment
-Must have transportation to and from work
– Strong attention to detail and ability to follow instructions
– Good communication skills and ability to work well in a team environment
Note: This job description is intended to provide a general overview of the position. Duties and responsibilities may be subject to change based on company needs and priorities.
SUPERVISORY RESPONSIBILITIES: None
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily in accordance with established standards and quality. The requirements below represent the required knowledge, skill, and/or ability. Reasonable accommodations may enable individuals with disabilities to perform essential functions.
LANGUAGE SKILLS: Ability to speak and read in either English or Spanish.
MATHEMATICAL SKILLS: Posses basic mathematical skills.
REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Be able to ask for further direction or help when not sure of what to do or is being asked of you.
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may enable individuals with disabilities to perform essential functions.
- Regular use of hands to fingers handles or feels.
- Required to reach with hands and arms.
- Must be able to lift, move and carry up to 50 lbs.
- Required to stand and walk throughout the day (except for seamstress’)
- May be required to climb, balance, stoop, kneel, crouch, or crawl.
- Specific vision abilities required may include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
* Note: physical demands may vary by position.
WORK ENVIRONMENT:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Occasional exposure to moving mechanical parts. Occasional exposure to cold or hot weather. The noise level in the work environment is usually moderate.
Schedule:
- 8 hour shift
- Monday to Friday
Work Location: In person
Benefits/Company
Beneficios:
- 401(k)
- Igualación de 401(k)
- Seguro dental
- Seguro de invalidez
- Programa de asistencia al empleado
- Horario flexible
- Seguro de enfermedad
- Cuenta de ahorros para la salud
- Seguro de vida
- Tiempo libre remunerado
- Programa de referidos
- Plan de jubilación
- Seguro de la vista
Compensation
Desde $15.00/hora
Robotic Welding Machine Operator
SUMMARY:
The Robotic Welding Machine Operator has primary responsibility for operating a Robot Welding machine in the Parts Department. They will maintain the robot welder and make sure parts are being accurately welded. Each job must be run with safety, accuracy, and timeliness. This is semi-strenuous work requiring good correct vision, lifting, stooping, kneeling, bending, reaching, pulling, tuning and walking from one workstation to another. You must physically be able to lift 50lbs. This is an entry level position, and we will train the right candidate.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:
- Operate, program, maintain, and troubleshoot welding robot.
- Operate robotic welding equipment efficiently and accurately to produce high-quality welds.
- Set up and program robotic welders according to job specifications and welding parameters.
- Plan details of work order procedures; gather required tools and materials based on instructions and specifications provided for the job.
- Observe robot in operation to maintain safety, quality, and throughput
- Communicate with other shifts and departments to aid in maintaining part quality to acceptable.
- Keep work area, tools, material and equipment clean and orderly.
- Work in Parts departments when not operating welding robot.
- Maintain, organize, and clean equipment and the work area.
- Perform other related duties as assigned.
QUALITY:
- Quality must always be a top priority.
SAFETY:
- Follow all company safety policies, other polices & procedures.
- Understand the Company’s worker and workplace safety policies and procedures.
- Report all safety hazards or concerns to your supervisor.
SUPERVISORY RESPONSIBILITIES: None.
Qualifications
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Must physically be able to lift 50lbs.
- Must be physically capable of standing/working for extended periods of time.
- Ability to speak and read in English. Bilingual in Spanish is a plus.
- Able to do basic math, specifically fractions.
- Able to use a measuring tape.
- Basic computer knowledge.
- A good work ethic.
- Detail oriented.
- Tenaciously work towards daily, monthly & annual department and company goals & objectives.
- Be able to prioritize.
- Be able to take direction, both verbally and written.
- Be able to work with others.
Education/Experience
EDUCATION and/or EXPERIENCE:
- A high school diploma or GED preferred.
- Previous robotic weld work experience helpful.
- At least 2 years of work-related experience preferred.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to use hands and fingers to handle or feel; talk or hear. The employee frequently is required to stand, walk, sit, reach with hands and arms; stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include good or corrected to 20/20 for close vision, distance vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job in a warehouse or light manufacturing environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is exposed to moving mechanical equipment and an environment and noise level consistent with light industrial manufacturing.
Job Type: Full-time
Benefits/Company
Benefits:
- 401(k) matching
- Health insurance
- Dental insurance
- Vision insurance
- Life insurance
- Paid time off
- Referral program
Schedule:
- Monday to Friday 6:30am to 3:00pm
- 8 hour shift
Work Location: In person
Compensation
Pay Range: $16.00 – $18.00 per hour
Expected hours: 40 per week
Order Expeditor
SUMMARY:
As an Order Expediter, you will play a crucial role in streamlining our production workflow. You will independently collaborate with various department supervisors to gather updates, push for expedited workflows, and ensure timely completion and shipment of orders. This role is pivotal in ensuring that our production lines meet the demands of our customers efficiently and effectively. This position requires a proactive approach, excellent communication skills, and the ability to work effectively under pressure.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:
DEPARTMENTAL DUTIES:
- Navigate through departments to inquire about production statuses and potential delays.
- Communicate effectively with supervisors and team members, especially in situations where there is disagreement.
- Make independent decisions regarding order dispatch based on real-time information.
- Memorize at least 85% of our 150+ SKUs within the first four weeks.
- Master our ERP system to foresee and coordinate future orders with current ready shipments.
- Develop and implement daily and weekly operational goals.
- Conduct weekly meetings with executives to discuss progress and goals.
SUPERVISORY RESPONSIBILITIES: None.
Qualifications
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Ability to work independently and direct others effectively.
- Strong decision-making skills and capability to perform in a fast-paced environment.
- Excellent memorization and organizational skills.
- Proficient in using enterprise resource planning (ERP) systems.
- Proficient Microsoft Office Excel skills
- Demonstrated ability to handle pressure and meet tight deadlines.
- Highly motivated and self-driven.
- Problem solving capabilities.
- Exceptional interpersonal and communication skills.
- Resilient, with the ability to manage stress and adapt to rapid changes.
LANGUAGE SKILLS: English & Spanish speaking preferred. English reading a must. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence in English. Ability to speak effectively before groups of customers or employees of organization in English. Ability to speak & read effectively in English.
MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
COMPUTER SKILLS: Proficient PC skills, including Microsoft Outlook and Excel. Experience in Epicor ERP a plus.
REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Must possess the ability to think & solve problems & obtain solutions.
Education/Experience
EDUCATION and/or EXPERIENCE:
- High school diploma or general education degree (GED)
- Additional education, certification and/or experience in logistics or supply chain management is a plus.
- One to three years related experience and/or training.
- One to three years of relevant experience in a production or order management role is preferred.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to use hands and fingers to handle or feel; talk or hear.
The employee frequently is required to stand, walk, sit, reach with hands and arms; stoop, kneel, crouch, or crawl.
The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds.
Specific vision abilities required by this job include good or corrected to 20/20 for close vision, distance vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. Employee must have closed toe, rubber sole shoes to wear anytime they are required to be in the factory. The noise level in the work environment is usually moderate.
Benefits/Company
Benefits:
- 401(k)
- 401(k) matching
- Health insurance
- Dental insurance
- Vision insurance
- Health savings account
- Life insurance
- Paid time off
- Paid Holidays
- Referral program
Schedule:
- 8 hour shift
- Monday to Friday
Work setting:
- In person
- Manufacturing facility
- Warehouse
Work Location: In person
Compensation
Job Type: Full-time
Pay Range: $18.00 to $22.00 per hour
Expected hours: 40 per week
Employment Form
"*" indicates required fields